深宏远环保空调的特点：

1.节能：环保空调的运行费用是传统压缩机空调的1/8，耗电量为每小时约一度。

2.环保：无化学氟利昂冷媒，完全靠水制冷的环保型产品。

3.空气清新：室外新鲜空气经过过滤进入室内，无须密闭,故无传统空调带来的不适应感。

4.降温明显：在珠三角较潮湿的地区，一般能达到5-10℃的降温效果，在特别炎热干燥（如北方）地区，可降温8-15℃。

5.噪音低：环保空调振动小，风量强劲，噪音低，工作环境安静舒适。

6.智能控制：定时开机、定时关机、定时自动清洗功能，真正实现无人操作，自动运行。

深宏远环保空调的降温原理：

靠近江河、海洋的地方都很凉爽，这是因为当热空气吹过水面时，水分子吸收热空气的热量而蒸发，从而使水面上的空气热量降低，温度下降，所以才感到凉爽。

深宏远环保空调**是根据这一自然现象，利用循环水泵，不间断的把水箱内的水抽出，均匀地喷淋在蒸发过滤层上，室外热空气通过湿濂网时，与水分子充分进行热量交换，使水分子蒸发吸热而达到降温效果。

深宏远六叶负压风机的特点：

Shen hong yuan Six of the suction ventilators features:

一、   风扇叶片与多V皮带轮组的平衡校正由专业技术人员负责。采用国外先进技术电脑平衡校正仪器，等级达4级水准（G6.3），符合ISO1940钢性运转体技术,达**要求。

1, fan blades and multi-V pulley group balance correction by professional technical staff. Use of advanced technology from abroad balance correction computer equipment, the standard grade of 4 (G6.3) and with the operation of the ISO1940 steel technologies to international quality requirements.

二、   本机所匹配的1HP马达采用全铝合金外壳，密封严、抽风效能好、耗电量少、每小时只须0.75度电力。

2. This machine-match 1HP All motors used aluminum alloy shell, Seal strict,Good ventilation efficiency, Less power consumption, only 0.75 per hour of electricity.

三、   传动皮带采用PK多V皮带,耐磨损,运转时无传统皮带打滑及噪音的困扰。

3.more transmission belt use PK V belts, wear resistance, When running the not traditional belt slipping and noise nuisance.

四、   百叶窗的设计运用空气顺流原理,不需要使用电力及人员开关,美观大方,且可以防雨水侵入。

4. Louver air downstream use of the design principles, Do not use electricity and personnel switch, handsome generous, and can prevent water intrusion.

五、   主体外框采用FRP材质,可减少金属共鸣,且抗酸碱,防腐蚀,增加使用年限。(可连续使用10-20年)

5. FRP materials by the main frame, metal resonance can be reduced , And resistance

Acid-base,anti-corrosion, and increase life span. (Continuous use for 10-20 years).

深宏远负压风机的降温原理：

Shen hong yuan the suction ventilators coolingPrinciple:

负压风机是利用空气对流、负压换气的降温原理，由安装地点的对向---大门或窗户自然吸入新鲜空气,将室内闷热气体迅速，强制排出室外,任何通风不良问题均可改善,降温换气效果可达90%-97%。

suction ventilators Is to use air convection cooling principle of negative pressure ventilation, by the location of the installation of the doors or windows - to the natural inhalation of fresh air, indoor hot gas rapidly, from the mandatory outdoor, Any adverse problems can be improved ventilation, Ventilation cooling effect of up to 90% -97%.

EVAPORATIVE COOLING

(夏天在编织，洗染，生产&加工服装工厂等很容易达到40度用这种风机很容易降下7－12度。)

Temperature can easily exceed 40℃in spining,knitting,dyeing,finishing & garments factory during the summer if they are not equipped with cooling system.Such high temperature reduces product quality & worker productivity.Evaporative cooling is the most common method for reducing the temperature inside a factory.Air conditioning or refrigeratuib systems can be used,but their installation and operation costs are usually prohibitive.

Evaporative cooling is a process that reduces the temperature 7-12℃of air by the evaporation of water into the airstreams.As water is evaporated,energy is lost from the air reducing its temperature.Reduced temperature enters in to room and room become cool.

EVAPORATIVE COOLING PAD AND EXHAUST FAN SYSTEM

A Pad-and-Fan cooling system typically consists of axial flow